Server:Charon: Porovnání verzí

Z HKfree wiki
Skočit na navigaci Skočit na vyhledávání
 
(Není zobrazeno 5 mezilehlých verzí od jednoho dalšího uživatele.)
Řádek 1: Řádek 1:
 +
Služby charona přestěhovány:
 +
* uživatelské stránky lide.hkfree.org
 +
* ssh z lide.hkfree.org
 +
* vpn na vpn.hkfree.org
  
== Charon ==
+
<strike>
Linux version 2.6.9 (xsyrovy@nymfe54) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Fri Dec 10 15:33:21 CET 2004<br/>
+
Běží zde
BIOS-provided physical RAM map:<br/>
 
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)<br/>
 
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)<br/>
 
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)<br/>
 
BIOS-e820: 0000000000100000 - 000000001ef2fc00 (usable)<br/>
 
BIOS-e820: 000000001ef2fc00 - 000000001ef30000 (ACPI NVS)<br/>
 
BIOS-e820: 000000001ef30000 - 000000001ef40000 (ACPI data)<br/>
 
BIOS-e820: 000000001ef40000 - 000000001eff0000 (ACPI NVS)<br/>
 
BIOS-e820: 000000001eff0000 - 000000001f000000 (reserved)<br/>
 
BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)<br/>
 
BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)<br/>
 
495MB LOWMEM available.<br/>
 
found SMP MP-table at 000ff780<br/>
 
On node 0 totalpages: 126767<br/>
 
  DMA zone: 4096 pages, LIFO batch:1<br/>
 
  Normal zone: 122671 pages, LIFO batch:16<br/>
 
  HighMem zone: 0 pages, LIFO batch:1<br/>
 
DMI 2.3 present.<br/>
 
Intel MultiProcessor Specification v1.4<br/>
 
    Virtual Wire compatibility mode.<br/>
 
OEM ID:  Product ID: Springdale-G APIC at: 0xFEE00000<br/>
 
Processor #0 15:3 APIC version 20<br/>
 
I/O APIC #1 Version 32 at 0xFEC00000.<br/>
 
Enabling APIC mode:  Flat.  Using 1 I/O APICs<br/>
 
Processors: 1<br/>
 
Built 1 zonelists<br/>
 
Kernel command line: root=/dev/sda1 ro<br/>
 
Initializing CPU#0<br/>
 
CPU 0 irqstacks, hard=c0698000 soft=c0697000<br/>
 
PID hash table entries: 2048 (order: 11, 32768 bytes)<br/>
 
Detected 2261.736 MHz processor.<br/>
 
Using tsc for high-res timesource<br/>
 
Console: colour VGA+ 80x25<br/>
 
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)<br/>
 
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)<br/>
 
Memory: 495912k/507068k available (4262k kernel code, 10612k reserved, 1244k data, 192k init, 0k highmem)<br/>
 
Checking if this processor honours the WP bit even in supervisor mode... Ok.<br/>
 
Calibrating delay loop... 4456.44 BogoMIPS (lpj=2228224)<br/>
 
Security Scaffold v1.0.0 initialized<br/>
 
SELinux:  Initializing.<br/>
 
SELinux:  Starting in permissive mode<br/>
 
There is already a security framework initialized, register_security failed.<br/>
 
selinux_register_security:  Registering secondary module capability<br/>
 
Capability LSM initialized as secondary<br/>
 
There is already a security framework initialized, register_security failed.<br/>
 
Failure registering Root Plug module with the kernel<br/>
 
selinux_register_security:  There is already a secondary security module registered.<br/>
 
Failure registering Root Plug  module with primary security module.<br/>
 
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)<br/>
 
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000<br/>
 
CPU: After vendor identify, caps:  bfebfbff 00000000 00000000 00000000<br/>
 
monitor/mwait feature present.<br/>
 
using mwait in idle threads.<br/>
 
CPU: Trace cache: 12K uops, L1 D cache: 16K<br/>
 
CPU: L2 cache: 256K<br/>
 
CPU: After all inits, caps:        bfebfbff 00000000 00000000 00000080<br/>
 
Intel machine check architecture supported.<br/>
 
Intel machine check reporting enabled on CPU#0.<br/>
 
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available<br/>
 
CPU0: Thermal monitoring enabled<br/>
 
CPU: Intel(R) Celeron(R) CPU 2.26GHz stepping 03<br/>
 
Enabling fast FPU save and restore... done.<br/>
 
Enabling unmasked SIMD FPU exception support... done.<br/>
 
Checking 'hlt' instruction... OK.<br/>
 
ENABLING IO-APIC IRQs<br/>
 
..TIMER: vector=0x31 pin1=2 pin2=0<br/>
 
NET: Registered protocol family 16<br/>
 
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1<br/>
 
PCI: Using configuration type 1<br/>
 
mtrr: v2.0 (20020519)<br/>
 
Linux Plug and Play Support v0.97 (c) Adam Belay<br/>
 
SCSI subsystem initialized<br/>
 
usbcore: registered new driver usbfs<br/>
 
usbcore: registered new driver hub<br/>
 
PCI: Probing PCI hardware<br/>
 
PCI: Probing PCI hardware (bus 00)<br/>
 
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1<br/>
 
PCI: Transparent bridge - 0000:00:1e.0<br/>
 
PCI: Using IRQ router PIIX/ICH [8086/24d0] at 0000:00:1f.0<br/>
 
PCI->APIC IRQ transform: (B0,I2,P0) -> 16<br/>
 
PCI->APIC IRQ transform: (B0,I29,P0) -> 16<br/>
 
PCI->APIC IRQ transform: (B0,I29,P1) -> 19<br/>
 
PCI->APIC IRQ transform: (B0,I29,P2) -> 18<br/>
 
PCI->APIC IRQ transform: (B0,I29,P0) -> 16<br/>
 
PCI->APIC IRQ transform: (B0,I29,P3) -> 23<br/>
 
PCI->APIC IRQ transform: (B0,I31,P0) -> 18<br/>
 
PCI->APIC IRQ transform: (B0,I31,P0) -> 18<br/>
 
PCI->APIC IRQ transform: (B0,I31,P1) -> 17<br/>
 
PCI->APIC IRQ transform: (B1,I8,P0) -> 20<br/>
 
TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)<br/>
 
Machine check exception polling timer started.<br/>
 
VFS: Disk quotas dquot_6.5.1<br/>
 
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)<br/>
 
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).<br/>
 
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled<br/>
 
SGI XFS Quota Management subsystem<br/>
 
SELinux:  Registering netfilter hooks<br/>
 
Initializing Cryptographic API<br/>
 
lp: driver loaded but no devices found<br/>
 
Real Time Clock Driver v1.12<br/>
 
Non-volatile memory driver v1.2<br/>
 
hw_random hardware driver 1.0.0 loaded<br/>
 
ppdev: user-space parallel port driver<br/>
 
i8xx TCO timer: initialized (0x0460). heartbeat=30 sec (nowayout=1)<br/>
 
SoftDog: cannot register miscdev on minor=130 (err=-16)<br/>
 
ipmi message handler version v33<br/>
 
ipmi device interface version v33<br/>
 
IPMI System Interface driver version v33, KCS version v33, SMIC version v33, BT version v33<br/>
 
ipmi_si: Trying "kcs" at I/O port 0xca2<br/>
 
ipmi_si: Trying "smic" at I/O port 0xca9<br/>
 
ipmi_si: Trying "bt" at I/O port 0xe4<br/>
 
ipmi_si: Unable to find any System Interface(s)<br/>
 
IPMI Watchdog: driver version v33<br/>
 
Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot version v33.<br/>
 
Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds).<br/>
 
serio: i8042 AUX port at 0x60,0x64 irq 12<br/>
 
serio: i8042 KBD port at 0x60,0x64 irq 1<br/>
 
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled<br/>
 
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A<br/>
 
parport0: PC-style at 0x378 [PCSPP(,...)]<br/>
 
lp0: using parport0 (polling).<br/>
 
lp0: console ready<br/>
 
Using anticipatory io scheduler<br/>
 
floppy0: no floppy controllers found<br/>
 
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize<br/>
 
loop: loaded (max 8 devices)<br/>
 
nbd: registered device at major 43<br/>
 
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html<br/>
 
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others<br/>
 
eth0: 0000:01:08.0, 00:11:11:85:F5:43, IRQ 20.<br/>
 
  Board assembly 000000-000, Physical connectors present: RJ45<br/>
 
  Primary interface chip i82555 PHY #1.<br/>
 
  General self-test: passed.<br/>
 
  Serial sub-system self-test: passed.<br/>
 
  Internal registers self-test: passed.<br/>
 
  ROM checksum self-test: passed (0xed626fe2).<br/>
 
e100: Intel(R) PRO/100 Network Driver, 3.0.27-k2-NAPI<br/>
 
e100: Copyright(c) 1999-2004 Intel Corporation<br/>
 
PPP generic driver version 2.4.2<br/>
 
PPP Deflate Compression module registered<br/>
 
PPP BSD Compression module registered<br/>
 
Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)<br/>
 
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky<br/>
 
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2<br/>
 
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx<br/>
 
ICH5: IDE controller at PCI slot 0000:00:1f.1<br/>
 
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)<br/>
 
ICH5: chipset revision 2<br/>
 
ICH5: not 100% native mode: will probe irqs later<br/>
 
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio<br/>
 
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio<br/>
 
Probing IDE interface ide0...<br/>
 
Probing IDE interface ide1...<br/>
 
Probing IDE interface ide0...<br/>
 
Probing IDE interface ide1...<br/>
 
Probing IDE interface ide2...<br/>
 
ide2: Wait for ready failed before probe !<br/>
 
Probing IDE interface ide3...<br/>
 
ide3: Wait for ready failed before probe !<br/>
 
Probing IDE interface ide4...<br/>
 
ide4: Wait for ready failed before probe !<br/>
 
Probing IDE interface ide5...<br/>
 
ide5: Wait for ready failed before probe !<br/>
 
Loading Adaptec I2O RAID: Version 2.4 Build 5go<br/>
 
Detecting Adaptec I2O RAID controllers...<br/>
 
libata version 1.02 loaded.<br/>
 
ata_piix version 1.02<br/>
 
PCI: Setting latency timer of device 0000:00:1f.2 to 64<br/>
 
ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD800 irq 18<br/>
 
ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD808 irq 18<br/>
 
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f<br/>
 
ata1: dev 0 ATA, max UDMA/133, 390721968 sectors: lba48<br/>
 
ata1: dev 0 configured for UDMA/133<br/>
 
scsi0 : ata_piix<br/>
 
ata2: SATA port has no device.<br/>
 
scsi1 : ata_piix<br/>
 
  Vendor: ATA      Model: ST3200822AS      Rev: 3.01<br/>
 
  Type:  Direct-Access                      ANSI SCSI revision: 05<br/>
 
SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)<br/>
 
SCSI device sda: drive cache: write back<br/>
 
sda: sda1 sda2 sda3 sda4<br/>
 
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0<br/>
 
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 0<br/>
 
ehci_hcd 0000:00:1d.7: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller<br/>
 
PCI: Setting latency timer of device 0000:00:1d.7 to 64<br/>
 
ehci_hcd 0000:00:1d.7: irq 23, pci mem df852c00<br/>
 
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1<br/>
 
PCI: cache line size of 128 is not supported by device 0000:00:1d.7<br/>
 
ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10<br/>
 
hub 1-0:1.0: USB hub found<br/>
 
hub 1-0:1.0: 8 ports detected<br/>
 
USB Universal Host Controller Interface driver v2.2<br/>
 
uhci_hcd 0000:00:1d.0: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1<br/>
 
PCI: Setting latency timer of device 0000:00:1d.0 to 64<br/>
 
uhci_hcd 0000:00:1d.0: irq 16, io base 0000c800<br/>
 
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2<br/>
 
hub 2-0:1.0: USB hub found<br/>
 
hub 2-0:1.0: 2 ports detected<br/>
 
uhci_hcd 0000:00:1d.1: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2<br/>
 
PCI: Setting latency timer of device 0000:00:1d.1 to 64<br/>
 
uhci_hcd 0000:00:1d.1: irq 19, io base 0000cc00<br/>
 
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3<br/>
 
hub 3-0:1.0: USB hub found<br/>
 
hub 3-0:1.0: 2 ports detected<br/>
 
uhci_hcd 0000:00:1d.2: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3<br/>
 
PCI: Setting latency timer of device 0000:00:1d.2 to 64<br/>
 
uhci_hcd 0000:00:1d.2: irq 18, io base 0000d000<br/>
 
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4<br/>
 
hub 4-0:1.0: USB hub found<br/>
 
hub 4-0:1.0: 2 ports detected<br/>
 
uhci_hcd 0000:00:1d.3: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4<br/>
 
PCI: Setting latency timer of device 0000:00:1d.3 to 64<br/>
 
uhci_hcd 0000:00:1d.3: irq 16, io base 0000d400<br/>
 
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5<br/>
 
hub 5-0:1.0: USB hub found<br/>
 
hub 5-0:1.0: 2 ports detected<br/>
 
usbcore: registered new driver usblp<br/>
 
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver<br/>
 
Initializing USB Mass Storage driver...<br/>
 
usbcore: registered new driver usb-storage<br/>
 
USB Mass Storage support registered.<br/>
 
usbcore: registered new driver usbhid<br/>
 
drivers/usb/input/hid-core.c: v2.0:USB HID core driver<br/>
 
usbcore: registered new driver touchkitusb<br/>
 
usbcore: registered new driver cytherm<br/>
 
drivers/usb/misc/cytherm.c: v1.0:Cypress USB Thermometer driver<br/>
 
usbcore: registered new driver phidgetservo<br/>
 
mice: PS/2 mouse device common for all mice<br/>
 
i2c /dev entries driver<br/>
 
i2c_adapter i2c-0: Unsupported chip (man_id=0x41, chip_id=0x60).<br/>
 
md: linear personality registered as nr 1<br/>
 
md: raid0 personality registered as nr 2<br/>
 
md: raid1 personality registered as nr 3<br/>
 
md: raid5 personality registered as nr 4<br/>
 
raid5: automatically using best checksumming function: pIII_sse<br/>
 
  pIII_sse  :  3532.000 MB/sec<br/>
 
raid5: using function: pIII_sse (3532.000 MB/sec)<br/>
 
md: multipath personality registered as nr 7<br/>
 
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27<br/>
 
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com<br/>
 
GACT probability on<br/>
 
u32 classifier<br/>
 
    Perfomance counters on<br/>
 
    input device check on <br/>
 
    Actions configured <br/>
 
NET: Registered protocol family 2<br/>
 
IP: routing cache hash table of 4096 buckets, 32Kbytes<br/>
 
TCP: Hash tables configured (established 32768 bind 65536)<br/>
 
IPv4 over IPv4 tunneling driver<br/>
 
GRE over IPv4 tunneling driver<br/>
 
ip_conntrack version 2.1 (3961 buckets, 31688 max) - 332 bytes per conntrack<br/>
 
ip_tables: (C) 2000-2002 Netfilter core team<br/>
 
ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/<br/>
 
arp_tables: (C) 2002 David S. Miller<br/>
 
Initializing IPsec netlink socket<br/>
 
NET: Registered protocol family 1<br/>
 
NET: Registered protocol family 10<br/>
 
IPv6 over IPv4 tunneling driver<br/>
 
ip6_tables: (C) 2000-2002 Netfilter core team<br/>
 
registering ipv6 mark target<br/>
 
NET: Registered protocol family 17<br/>
 
NET: Registered protocol family 15<br/>
 
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com><br/>
 
All bugs added by David S. Miller <davem@redhat.com><br/>
 
md: Autodetecting RAID arrays.<br/>
 
md: autorun ...<br/>
 
md: ... autorun DONE.<br/>
 
kjournald starting.  Commit interval 5 seconds<br/>
 
EXT3-fs: mounted filesystem with ordered data mode.<br/>
 
VFS: Mounted root (ext3 filesystem) readonly.<br/>
 
Freeing unused kernel memory: 192k freed<br/>
 
Adding 506036k swap on /dev/sda2.  Priority:-1 extents:1<br/>
 
EXT3 FS on sda1, internal journal<br/>
 
kjournald starting.  Commit interval 5 seconds<br/>
 
EXT3 FS on sda3, internal journal<br/>
 
EXT3-fs: mounted filesystem with ordered data mode.<br/>
 
kjournald starting.  Commit interval 5 seconds<br/>
 
EXT3 FS on sda4, internal journal<br/>
 
EXT3-fs: mounted filesystem with ordered data mode.<br/>
 
Disabled Privacy Extensions on device c05ebd80(lo)<br/>
 
eth0: freeing mc frame.<br/>
 
nfs warning: mount version older than kernel<br/>
 
RPC: call_verify: program 100003, version 3 unsupported by server orion.hkfree.org<br/>
 
RPC: call_verify: program 100003, version 3 unsupported by server orion.hkfree.org<br/>
 
nfs warning: mount version older than kernel<br/>
 
ttyS1: LSR safety check engaged!<br/>
 
ttyS1: LSR safety check engaged!<br/>
 
  
== Co zde najdu ? ==
+
* DNS - primární DNS pro zónu hkfree.org a spoustu dalších
 +
* [[Emaily_v_HKfree|Mail server]] - primární mail server pro @hkfree.org a doporučovaný smtp server pro připojence
 +
* apache - Webové stránky uživatelů a sdružení
 +
* [[Jabber]]
 +
* FTP
 +
* [[Shell|SSH]] - možnost pro uživatele si založit shellový účet
 +
* [[OpenVPN]] - jak pro uživatele, tak i do další CZF-like sítí
 +
 
 +
IP
 +
 
 +
* 89.248.240.1 (primární)
 +
* 10.107.4.100
 +
* 2a01:168:f000::1
 +
</strike>

Aktuální verze z 13. 9. 2012, 09:35

Služby charona přestěhovány:

  • uživatelské stránky lide.hkfree.org
  • ssh z lide.hkfree.org
  • vpn na vpn.hkfree.org

Běží zde

  • DNS - primární DNS pro zónu hkfree.org a spoustu dalších
  • Mail server - primární mail server pro @hkfree.org a doporučovaný smtp server pro připojence
  • apache - Webové stránky uživatelů a sdružení
  • Jabber
  • FTP
  • SSH - možnost pro uživatele si založit shellový účet
  • OpenVPN - jak pro uživatele, tak i do další CZF-like sítí

IP

  • 89.248.240.1 (primární)
  • 10.107.4.100
  • 2a01:168:f000::1