|
|
| (Není zobrazeno 5 mezilehlých verzí od jednoho dalšího uživatele.) |
| Řádek 1: |
Řádek 1: |
| | + | Služby charona přestěhovány: |
| | + | * uživatelské stránky lide.hkfree.org |
| | + | * ssh z lide.hkfree.org |
| | + | * vpn na vpn.hkfree.org |
| | | | |
| − | == Charon ==
| + | <strike> |
| − | Linux version 2.6.9 (xsyrovy@nymfe54) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #1 Fri Dec 10 15:33:21 CET 2004<br/>
| + | Běží zde |
| − | BIOS-provided physical RAM map:<br/>
| |
| − | BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)<br/>
| |
| − | BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)<br/>
| |
| − | BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)<br/>
| |
| − | BIOS-e820: 0000000000100000 - 000000001ef2fc00 (usable)<br/>
| |
| − | BIOS-e820: 000000001ef2fc00 - 000000001ef30000 (ACPI NVS)<br/>
| |
| − | BIOS-e820: 000000001ef30000 - 000000001ef40000 (ACPI data)<br/>
| |
| − | BIOS-e820: 000000001ef40000 - 000000001eff0000 (ACPI NVS)<br/>
| |
| − | BIOS-e820: 000000001eff0000 - 000000001f000000 (reserved)<br/>
| |
| − | BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved)<br/>
| |
| − | BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)<br/>
| |
| − | 495MB LOWMEM available.<br/>
| |
| − | found SMP MP-table at 000ff780<br/>
| |
| − | On node 0 totalpages: 126767<br/>
| |
| − | DMA zone: 4096 pages, LIFO batch:1<br/>
| |
| − | Normal zone: 122671 pages, LIFO batch:16<br/>
| |
| − | HighMem zone: 0 pages, LIFO batch:1<br/>
| |
| − | DMI 2.3 present.<br/>
| |
| − | Intel MultiProcessor Specification v1.4<br/>
| |
| − | Virtual Wire compatibility mode.<br/>
| |
| − | OEM ID: Product ID: Springdale-G APIC at: 0xFEE00000<br/>
| |
| − | Processor #0 15:3 APIC version 20<br/>
| |
| − | I/O APIC #1 Version 32 at 0xFEC00000.<br/>
| |
| − | Enabling APIC mode: Flat. Using 1 I/O APICs<br/>
| |
| − | Processors: 1<br/>
| |
| − | Built 1 zonelists<br/>
| |
| − | Kernel command line: root=/dev/sda1 ro<br/>
| |
| − | Initializing CPU#0<br/>
| |
| − | CPU 0 irqstacks, hard=c0698000 soft=c0697000<br/>
| |
| − | PID hash table entries: 2048 (order: 11, 32768 bytes)<br/>
| |
| − | Detected 2261.736 MHz processor.<br/>
| |
| − | Using tsc for high-res timesource<br/>
| |
| − | Console: colour VGA+ 80x25<br/>
| |
| − | Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)<br/>
| |
| − | Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)<br/>
| |
| − | Memory: 495912k/507068k available (4262k kernel code, 10612k reserved, 1244k data, 192k init, 0k highmem)<br/>
| |
| − | Checking if this processor honours the WP bit even in supervisor mode... Ok.<br/>
| |
| − | Calibrating delay loop... 4456.44 BogoMIPS (lpj=2228224)<br/>
| |
| − | Security Scaffold v1.0.0 initialized<br/>
| |
| − | SELinux: Initializing.<br/>
| |
| − | SELinux: Starting in permissive mode<br/>
| |
| − | There is already a security framework initialized, register_security failed.<br/>
| |
| − | selinux_register_security: Registering secondary module capability<br/>
| |
| − | Capability LSM initialized as secondary<br/>
| |
| − | There is already a security framework initialized, register_security failed.<br/>
| |
| − | Failure registering Root Plug module with the kernel<br/>
| |
| − | selinux_register_security: There is already a secondary security module registered.<br/>
| |
| − | Failure registering Root Plug module with primary security module.<br/>
| |
| − | Mount-cache hash table entries: 512 (order: 0, 4096 bytes)<br/>
| |
| − | CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000<br/>
| |
| − | CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000<br/>
| |
| − | monitor/mwait feature present.<br/>
| |
| − | using mwait in idle threads.<br/>
| |
| − | CPU: Trace cache: 12K uops, L1 D cache: 16K<br/>
| |
| − | CPU: L2 cache: 256K<br/>
| |
| − | CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080<br/>
| |
| − | Intel machine check architecture supported.<br/>
| |
| − | Intel machine check reporting enabled on CPU#0.<br/>
| |
| − | CPU0: Intel P4/Xeon Extended MCE MSRs (12) available<br/>
| |
| − | CPU0: Thermal monitoring enabled<br/>
| |
| − | CPU: Intel(R) Celeron(R) CPU 2.26GHz stepping 03<br/>
| |
| − | Enabling fast FPU save and restore... done.<br/>
| |
| − | Enabling unmasked SIMD FPU exception support... done.<br/>
| |
| − | Checking 'hlt' instruction... OK.<br/>
| |
| − | ENABLING IO-APIC IRQs<br/>
| |
| − | ..TIMER: vector=0x31 pin1=2 pin2=0<br/>
| |
| − | NET: Registered protocol family 16<br/>
| |
| − | PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1<br/>
| |
| − | PCI: Using configuration type 1<br/>
| |
| − | mtrr: v2.0 (20020519)<br/>
| |
| − | Linux Plug and Play Support v0.97 (c) Adam Belay<br/>
| |
| − | SCSI subsystem initialized<br/>
| |
| − | usbcore: registered new driver usbfs<br/>
| |
| − | usbcore: registered new driver hub<br/>
| |
| − | PCI: Probing PCI hardware<br/>
| |
| − | PCI: Probing PCI hardware (bus 00)<br/>
| |
| − | PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1<br/>
| |
| − | PCI: Transparent bridge - 0000:00:1e.0<br/>
| |
| − | PCI: Using IRQ router PIIX/ICH [8086/24d0] at 0000:00:1f.0<br/>
| |
| − | PCI->APIC IRQ transform: (B0,I2,P0) -> 16<br/>
| |
| − | PCI->APIC IRQ transform: (B0,I29,P0) -> 16<br/>
| |
| − | PCI->APIC IRQ transform: (B0,I29,P1) -> 19<br/>
| |
| − | PCI->APIC IRQ transform: (B0,I29,P2) -> 18<br/>
| |
| − | PCI->APIC IRQ transform: (B0,I29,P0) -> 16<br/>
| |
| − | PCI->APIC IRQ transform: (B0,I29,P3) -> 23<br/>
| |
| − | PCI->APIC IRQ transform: (B0,I31,P0) -> 18<br/>
| |
| − | PCI->APIC IRQ transform: (B0,I31,P0) -> 18<br/>
| |
| − | PCI->APIC IRQ transform: (B0,I31,P1) -> 17<br/>
| |
| − | PCI->APIC IRQ transform: (B1,I8,P0) -> 20<br/>
| |
| − | TC classifier action (bugs to netdev@oss.sgi.com cc hadi@cyberus.ca)<br/>
| |
| − | Machine check exception polling timer started.<br/>
| |
| − | VFS: Disk quotas dquot_6.5.1<br/>
| |
| − | Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)<br/>
| |
| − | Installing knfsd (copyright (C) 1996 okir@monad.swb.de).<br/>
| |
| − | SGI XFS with ACLs, security attributes, large block numbers, no debug enabled<br/>
| |
| − | SGI XFS Quota Management subsystem<br/>
| |
| − | SELinux: Registering netfilter hooks<br/>
| |
| − | Initializing Cryptographic API<br/>
| |
| − | lp: driver loaded but no devices found<br/>
| |
| − | Real Time Clock Driver v1.12<br/>
| |
| − | Non-volatile memory driver v1.2<br/>
| |
| − | hw_random hardware driver 1.0.0 loaded<br/>
| |
| − | ppdev: user-space parallel port driver<br/>
| |
| − | i8xx TCO timer: initialized (0x0460). heartbeat=30 sec (nowayout=1)<br/>
| |
| − | SoftDog: cannot register miscdev on minor=130 (err=-16)<br/>
| |
| − | ipmi message handler version v33<br/>
| |
| − | ipmi device interface version v33<br/>
| |
| − | IPMI System Interface driver version v33, KCS version v33, SMIC version v33, BT version v33<br/>
| |
| − | ipmi_si: Trying "kcs" at I/O port 0xca2<br/>
| |
| − | ipmi_si: Trying "smic" at I/O port 0xca9<br/>
| |
| − | ipmi_si: Trying "bt" at I/O port 0xe4<br/>
| |
| − | ipmi_si: Unable to find any System Interface(s)<br/>
| |
| − | IPMI Watchdog: driver version v33<br/>
| |
| − | Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot version v33.<br/>
| |
| − | Hangcheck: starting hangcheck timer 0.5.0 (tick is 180 seconds, margin is 60 seconds).<br/>
| |
| − | serio: i8042 AUX port at 0x60,0x64 irq 12<br/>
| |
| − | serio: i8042 KBD port at 0x60,0x64 irq 1<br/>
| |
| − | Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled<br/>
| |
| − | ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A<br/>
| |
| − | parport0: PC-style at 0x378 [PCSPP(,...)]<br/>
| |
| − | lp0: using parport0 (polling).<br/>
| |
| − | lp0: console ready<br/>
| |
| − | Using anticipatory io scheduler<br/>
| |
| − | floppy0: no floppy controllers found<br/>
| |
| − | RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize<br/>
| |
| − | loop: loaded (max 8 devices)<br/>
| |
| − | nbd: registered device at major 43<br/>
| |
| − | eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html<br/>
| |
| − | eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others<br/>
| |
| − | eth0: 0000:01:08.0, 00:11:11:85:F5:43, IRQ 20.<br/>
| |
| − | Board assembly 000000-000, Physical connectors present: RJ45<br/>
| |
| − | Primary interface chip i82555 PHY #1.<br/>
| |
| − | General self-test: passed.<br/>
| |
| − | Serial sub-system self-test: passed.<br/>
| |
| − | Internal registers self-test: passed.<br/>
| |
| − | ROM checksum self-test: passed (0xed626fe2).<br/>
| |
| − | e100: Intel(R) PRO/100 Network Driver, 3.0.27-k2-NAPI<br/>
| |
| − | e100: Copyright(c) 1999-2004 Intel Corporation<br/>
| |
| − | PPP generic driver version 2.4.2<br/>
| |
| − | PPP Deflate Compression module registered<br/>
| |
| − | PPP BSD Compression module registered<br/>
| |
| − | Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)<br/>
| |
| − | Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky<br/>
| |
| − | Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2<br/>
| |
| − | ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx<br/>
| |
| − | ICH5: IDE controller at PCI slot 0000:00:1f.1<br/>
| |
| − | PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)<br/>
| |
| − | ICH5: chipset revision 2<br/>
| |
| − | ICH5: not 100% native mode: will probe irqs later<br/>
| |
| − | ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio<br/>
| |
| − | ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio<br/>
| |
| − | Probing IDE interface ide0...<br/>
| |
| − | Probing IDE interface ide1...<br/>
| |
| − | Probing IDE interface ide0...<br/>
| |
| − | Probing IDE interface ide1...<br/>
| |
| − | Probing IDE interface ide2...<br/>
| |
| − | ide2: Wait for ready failed before probe !<br/>
| |
| − | Probing IDE interface ide3...<br/>
| |
| − | ide3: Wait for ready failed before probe !<br/>
| |
| − | Probing IDE interface ide4...<br/>
| |
| − | ide4: Wait for ready failed before probe !<br/>
| |
| − | Probing IDE interface ide5...<br/>
| |
| − | ide5: Wait for ready failed before probe !<br/>
| |
| − | Loading Adaptec I2O RAID: Version 2.4 Build 5go<br/>
| |
| − | Detecting Adaptec I2O RAID controllers...<br/>
| |
| − | libata version 1.02 loaded.<br/>
| |
| − | ata_piix version 1.02<br/>
| |
| − | PCI: Setting latency timer of device 0000:00:1f.2 to 64<br/>
| |
| − | ata1: SATA max UDMA/133 cmd 0xE800 ctl 0xE402 bmdma 0xD800 irq 18<br/>
| |
| − | ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD808 irq 18<br/>
| |
| − | ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f<br/>
| |
| − | ata1: dev 0 ATA, max UDMA/133, 390721968 sectors: lba48<br/>
| |
| − | ata1: dev 0 configured for UDMA/133<br/>
| |
| − | scsi0 : ata_piix<br/>
| |
| − | ata2: SATA port has no device.<br/>
| |
| − | scsi1 : ata_piix<br/>
| |
| − | Vendor: ATA Model: ST3200822AS Rev: 3.01<br/>
| |
| − | Type: Direct-Access ANSI SCSI revision: 05<br/>
| |
| − | SCSI device sda: 390721968 512-byte hdwr sectors (200050 MB)<br/>
| |
| − | SCSI device sda: drive cache: write back<br/>
| |
| − | sda: sda1 sda2 sda3 sda4<br/>
| |
| − | Attached scsi disk sda at scsi0, channel 0, id 0, lun 0<br/>
| |
| − | Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0<br/>
| |
| − | ehci_hcd 0000:00:1d.7: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller<br/>
| |
| − | PCI: Setting latency timer of device 0000:00:1d.7 to 64<br/>
| |
| − | ehci_hcd 0000:00:1d.7: irq 23, pci mem df852c00<br/>
| |
| − | ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1<br/>
| |
| − | PCI: cache line size of 128 is not supported by device 0000:00:1d.7<br/>
| |
| − | ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10<br/>
| |
| − | hub 1-0:1.0: USB hub found<br/>
| |
| − | hub 1-0:1.0: 8 ports detected<br/>
| |
| − | USB Universal Host Controller Interface driver v2.2<br/>
| |
| − | uhci_hcd 0000:00:1d.0: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1<br/>
| |
| − | PCI: Setting latency timer of device 0000:00:1d.0 to 64<br/>
| |
| − | uhci_hcd 0000:00:1d.0: irq 16, io base 0000c800<br/>
| |
| − | uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2<br/>
| |
| − | hub 2-0:1.0: USB hub found<br/>
| |
| − | hub 2-0:1.0: 2 ports detected<br/>
| |
| − | uhci_hcd 0000:00:1d.1: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2<br/>
| |
| − | PCI: Setting latency timer of device 0000:00:1d.1 to 64<br/>
| |
| − | uhci_hcd 0000:00:1d.1: irq 19, io base 0000cc00<br/>
| |
| − | uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3<br/>
| |
| − | hub 3-0:1.0: USB hub found<br/>
| |
| − | hub 3-0:1.0: 2 ports detected<br/>
| |
| − | uhci_hcd 0000:00:1d.2: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3<br/>
| |
| − | PCI: Setting latency timer of device 0000:00:1d.2 to 64<br/>
| |
| − | uhci_hcd 0000:00:1d.2: irq 18, io base 0000d000<br/>
| |
| − | uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4<br/>
| |
| − | hub 4-0:1.0: USB hub found<br/>
| |
| − | hub 4-0:1.0: 2 ports detected<br/>
| |
| − | uhci_hcd 0000:00:1d.3: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4<br/>
| |
| − | PCI: Setting latency timer of device 0000:00:1d.3 to 64<br/>
| |
| − | uhci_hcd 0000:00:1d.3: irq 16, io base 0000d400<br/>
| |
| − | uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5<br/>
| |
| − | hub 5-0:1.0: USB hub found<br/>
| |
| − | hub 5-0:1.0: 2 ports detected<br/>
| |
| − | usbcore: registered new driver usblp<br/>
| |
| − | drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver<br/>
| |
| − | Initializing USB Mass Storage driver...<br/>
| |
| − | usbcore: registered new driver usb-storage<br/>
| |
| − | USB Mass Storage support registered.<br/>
| |
| − | usbcore: registered new driver usbhid<br/>
| |
| − | drivers/usb/input/hid-core.c: v2.0:USB HID core driver<br/>
| |
| − | usbcore: registered new driver touchkitusb<br/>
| |
| − | usbcore: registered new driver cytherm<br/>
| |
| − | drivers/usb/misc/cytherm.c: v1.0:Cypress USB Thermometer driver<br/>
| |
| − | usbcore: registered new driver phidgetservo<br/>
| |
| − | mice: PS/2 mouse device common for all mice<br/>
| |
| − | i2c /dev entries driver<br/>
| |
| − | i2c_adapter i2c-0: Unsupported chip (man_id=0x41, chip_id=0x60).<br/>
| |
| − | md: linear personality registered as nr 1<br/>
| |
| − | md: raid0 personality registered as nr 2<br/>
| |
| − | md: raid1 personality registered as nr 3<br/>
| |
| − | md: raid5 personality registered as nr 4<br/>
| |
| − | raid5: automatically using best checksumming function: pIII_sse<br/>
| |
| − | pIII_sse : 3532.000 MB/sec<br/>
| |
| − | raid5: using function: pIII_sse (3532.000 MB/sec)<br/>
| |
| − | md: multipath personality registered as nr 7<br/>
| |
| − | md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27<br/>
| |
| − | device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com<br/>
| |
| − | GACT probability on<br/>
| |
| − | u32 classifier<br/>
| |
| − | Perfomance counters on<br/>
| |
| − | input device check on <br/>
| |
| − | Actions configured <br/>
| |
| − | NET: Registered protocol family 2<br/>
| |
| − | IP: routing cache hash table of 4096 buckets, 32Kbytes<br/>
| |
| − | TCP: Hash tables configured (established 32768 bind 65536)<br/>
| |
| − | IPv4 over IPv4 tunneling driver<br/>
| |
| − | GRE over IPv4 tunneling driver<br/>
| |
| − | ip_conntrack version 2.1 (3961 buckets, 31688 max) - 332 bytes per conntrack<br/>
| |
| − | ip_tables: (C) 2000-2002 Netfilter core team<br/>
| |
| − | ipt_recent v0.3.1: Stephen Frost <sfrost@snowman.net>. http://snowman.net/projects/ipt_recent/<br/>
| |
| − | arp_tables: (C) 2002 David S. Miller<br/>
| |
| − | Initializing IPsec netlink socket<br/>
| |
| − | NET: Registered protocol family 1<br/>
| |
| − | NET: Registered protocol family 10<br/>
| |
| − | IPv6 over IPv4 tunneling driver<br/>
| |
| − | ip6_tables: (C) 2000-2002 Netfilter core team<br/>
| |
| − | registering ipv6 mark target<br/>
| |
| − | NET: Registered protocol family 17<br/>
| |
| − | NET: Registered protocol family 15<br/>
| |
| − | 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com><br/>
| |
| − | All bugs added by David S. Miller <davem@redhat.com><br/>
| |
| − | md: Autodetecting RAID arrays.<br/>
| |
| − | md: autorun ...<br/>
| |
| − | md: ... autorun DONE.<br/>
| |
| − | kjournald starting. Commit interval 5 seconds<br/>
| |
| − | EXT3-fs: mounted filesystem with ordered data mode.<br/>
| |
| − | VFS: Mounted root (ext3 filesystem) readonly.<br/>
| |
| − | Freeing unused kernel memory: 192k freed<br/>
| |
| − | Adding 506036k swap on /dev/sda2. Priority:-1 extents:1<br/>
| |
| − | EXT3 FS on sda1, internal journal<br/>
| |
| − | kjournald starting. Commit interval 5 seconds<br/>
| |
| − | EXT3 FS on sda3, internal journal<br/>
| |
| − | EXT3-fs: mounted filesystem with ordered data mode.<br/>
| |
| − | kjournald starting. Commit interval 5 seconds<br/>
| |
| − | EXT3 FS on sda4, internal journal<br/>
| |
| − | EXT3-fs: mounted filesystem with ordered data mode.<br/>
| |
| − | Disabled Privacy Extensions on device c05ebd80(lo)<br/>
| |
| − | eth0: freeing mc frame.<br/>
| |
| − | nfs warning: mount version older than kernel<br/>
| |
| − | RPC: call_verify: program 100003, version 3 unsupported by server orion.hkfree.org<br/>
| |
| − | RPC: call_verify: program 100003, version 3 unsupported by server orion.hkfree.org<br/>
| |
| − | nfs warning: mount version older than kernel<br/>
| |
| − | ttyS1: LSR safety check engaged!<br/>
| |
| − | ttyS1: LSR safety check engaged!<br/>
| |
| | | | |
| − | == Co zde najdu ? ==
| + | * DNS - primární DNS pro zónu hkfree.org a spoustu dalších |
| | + | * [[Emaily_v_HKfree|Mail server]] - primární mail server pro @hkfree.org a doporučovaný smtp server pro připojence |
| | + | * apache - Webové stránky uživatelů a sdružení |
| | + | * [[Jabber]] |
| | + | * FTP |
| | + | * [[Shell|SSH]] - možnost pro uživatele si založit shellový účet |
| | + | * [[OpenVPN]] - jak pro uživatele, tak i do další CZF-like sítí |
| | + | |
| | + | IP |
| | + | |
| | + | * 89.248.240.1 (primární) |
| | + | * 10.107.4.100 |
| | + | * 2a01:168:f000::1 |
| | + | </strike> |
